How To Attach A Bodyboarding Leash To Your Board

Table of Contents

As a bodyboarder, one of the most essential accessories you need to have is a leash. It connects the rider to the board and ensures that even if you wipe out, you won’t lose your board and end up swimming back to shore. Attaching a bodyboarding leash to your board is a simple process that can be done in a matter of minutes. In this article, we’ll walk you through the steps involved in securing your leash, as well as answer some of the most commonly asked questions about bodyboarding leashes.

 

How to attach a bodyboarding leash to your board

Before you start, you’ll need a few things:

– A bodyboarding leash
– A bodyboard
– A fin key

 

Let’s get started

Step 1: Locate the leash plug

The first thing you need to do is locate the leash plug on your bodyboard. It’s usually located at the tail of the board, and it’s a small hole with a plastic or metal insert. This insert is called the leash plug.

Step 2: Unscrew the leash plug

Using the fin key, unscrew the leash plug from the board. Be careful not to lose the screw, as you’ll need it when you attach the leash.

Step 3: Thread the string through the leash plug

Take the string attached to the bodyboarding leash and thread it through the leash plug. Make sure it goes through the hole and comes out the other side.

Step 4: Tie a knot

Take the two ends of the string and tie them together using a double knot. This knot will keep the leash in place and prevent it from slipping out of the leash plug.

Step 5: Attach the leash to your ankle

Put on the ankle strap and attach it to the other end of the leash. Make sure it’s snug around your ankle, but not too tight.

Step 6: Test the leash

Before you hit the waves, give the leash a good tug to make sure it’s secure. You don’t want the leash coming off in the middle of a ride.

Congratulations, you’ve attached your bodyboarding leash to your board.

 

Now, let’s answer some common questions about bodyboarding leashes.

 

How long should a bodyboarding leash be?

Bodyboarding leashes come in different lengths, ranging from 4 feet to 6 feet. Your leash should be long enough to allow you to maneuver the board comfortably, but not so long that it gets tangled or caught in the waves.

 

Should I use a coiled or straight leash?

Coiled leashes are preferred by most bodyboarders as they don’t drag and get caught in the waves. They also tend to last longer and are less likely to get damaged. However, some riders prefer straight leashes as they offer a greater range of motion.

 

Can I use a surfboard leash on my bodyboard?

No, it’s not recommended. Surfboard leashes are longer and thicker than bodyboarding leashes, and they can get tangled or caught in the waves, which can be dangerous.

 

How often should I replace my bodyboarding leash?

It depends on how often you use it and the condition it’s in. If you use your leash regularly or in rough conditions, you should replace it at least once a year. If you notice any signs of wear or tear, such as fraying or cracking, it’s time for a new leash.

 

How do I care for my bodyboarding leash?

To prolong the life of your leash, rinse it with fresh water after each session. Don’t leave it in the sun for prolonged periods as this can damage the material. To store it, hang it in a cool, dry place away from sunlight.

 

Can I use a bodyboarding leash without an ankle strap?

No, the ankle strap is an essential part of the leash, and it keeps you connected to the board. Without it, you risk losing your board and getting separated from it in the water.

 

Conclusion

Attaching a bodyboarding leash to your board is a straightforward process that requires little effort. Always make sure your leash is securely attached and in good condition before heading out to the waves. Taking good care of your leash will ensure that it lasts long and keeps you safe in the water. By following the steps outlined in this article and taking the necessary precautions, you’ll be able to enjoy your bodyboarding experience to the fullest.

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »