How To Clean Skateboard Trucks?

Table of Contents

Skateboarding is a popular pastime for people of all ages, and it’s not uncommon to see skateboarders cruising down the street or performing tricks in the park. However, in order to ensure that your skateboard is in good working condition, it’s important to keep it clean and well-maintained. One of the most important parts of a skateboard to keep clean is the trucks, which are responsible for turning and stability. In this article, we’ll go over some tips and tricks for cleaning skateboard trucks so you can keep your ride smooth and safe.

 

Why Is It Important To Clean Skateboard Trucks?

It is important to clean skateboard trucks for several reasons:

  1. Improved performance: Dirty trucks can cause the skateboard to feel sluggish and unresponsive. By cleaning the trucks, you can improve their performance and make your skateboard feel more responsive.
  2. Extended lifespan: Over time, dirt and grime can build up on the trucks and cause them to wear out more quickly. By cleaning them regularly, you can help extend the lifespan of your trucks and save money on replacements.
  3. Increased safety: If your trucks are dirty, it can affect your ability to ride safely. For example, if there is dirt or grime on your trucks, it can cause them to become slippery and reduce your traction. By cleaning your trucks, you can ensure they are in good condition and reduce the risk of accidents.
  4. Aesthetics: A clean skateboard looks better than a dirty one. If you care about the appearance of your skateboard, it’s important to keep your trucks clean as well.

 

How To Clean Skateboard Trucks: Step by Step

STEP 1: You must first separate the skateboard truck from the skateboard deck because they are attached. Start loosening the nuts by holding a screwdriver and a pair of slip-joint pliers in your hands.

Every nut should be unscrewed gradually so that you may finish by hand. Completely loosen the nuts and remove them from the bolts.

A lot of people will scatter nuts in an area that will be challenging to find afterward. Keep nuts in a safe location that you are comfortable with. During reassembly, it will be simple to remember.

 

STEP 2: By now, you should have finished removing the nuts and selected a suitable shelter for them. The right time has come to detach the deck from the vehicle.

To successfully separate the vehicle, use your hands. Do not exert great power when pulling. Be careful to face the kingpin outward as well.

 

STEP 3: Not all skateboard trucks must follow this step. At this stage, you also need to remove the risers from any trucks you may have. There isn’t a riser in every skateboard truck.

 

STEP 4. You essentially have to remove everything from trucks, excluding the baseplate. Remove the kingpin’s nut first. The hanger should then be removed from the baseplate. Finally, take out each bushing.

 

STEP 5: Consider these components. Try to find a crack. One of these parts needs to be replaced if it is found to be split or broken.

Assuming everything is in good shape, spray some WD-40 onto a paper towel and wipe the grime and grit off of all the pieces. Due to the heavy dirt, your trucks create high-pitched noises while being driven.

 

STEP 6: You must once again clean those axles. The axle is typically the dirtiest of all the parts.

Grab a different paper towel. Clear the axles of any leftover debris. All of this axle dust is caused by bearings. So, make sure they return in excellent shape.

 

STEP 7: Use the same cleaning procedure on the remaining vehicle. Then you may begin to put yourself back together. Keep in mind that nuts and bolts need to be sufficiently tightened.

Both excessive and loose tightness are undesirable. After the assembly, the kingpin must be pointing outward.

 

How To Maintain Clean Skateboard Trucks

To maintain clean skateboard trucks, follow these steps:

  1. Remove any dirt or debris from the trucks using a toothbrush or small brush. This will help to loosen any caked-on dirt and make it easier to remove.
  2. Wipe down the trucks with a damp cloth to remove any remaining dirt and grime. Be sure to get into all the nooks and crannies, as these areas can accumulate dirt and grime over time.
  3. If the trucks are particularly dirty, you may need to use a mild soap or detergent to help remove any stubborn dirt or grime. Be sure to rinse the trucks thoroughly to remove any soap residue.
  4. Dry the trucks completely before reattaching them to your skateboard. This will help to prevent rust and ensure that they are ready to use.
  5. To prevent future dirt and grime buildup, try to keep your skateboard clean and dry when not in use. This will help to prevent dirt and grime from accumulating on your trucks, keeping them clean and functioning properly.

 

Conclusion

In conclusion, cleaning skateboard trucks is an important task for maintaining the performance and longevity of your skateboard. By following the steps outlined in this guide, you can easily clean your trucks using simple tools and supplies found around the house. Regular cleaning and lubrication of your trucks will help to keep them in top condition, ensuring a smooth and enjoyable ride every time. So don’t forget to give your trucks some TLC, and happy skating!

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »