How To Fix Bodyboard Top

Table of Contents

As a bodyboarder, your bodyboard is your best friend. But after a while of usage, you may notice some wear and tear on the top of your board that can’t be ignored. This can negatively impact your surfing performance and decrease the life of your bodyboard. But don’t worry, fixing a bodyboard top is an easy task that you can do at home. In this article, we’ll explore the steps you need to take to fix a bodyboard top, as well as some sub-questions that could be helpful in obtaining more information on this topic.


What materials do you need to fix a bodyboard top?

To fix a bodyboard top, you typically need the following materials:

  1. Bodyboard repair kit: This kit usually includes the necessary materials and tools for repairing bodyboards. It can be purchased from surf shops or online retailers. The kit may contain the following items:
    • Epoxy resin: This is a strong adhesive used to bond the materials together.
    • Catalyst/hardener: This is mixed with the epoxy resin to initiate the curing process.
    • Fiberglass cloth: A thin sheet of fiberglass material used to reinforce and strengthen the repair area.
    • Sandpaper: Various grits of sandpaper are used to prepare the surface and smooth the repaired area.
    • Mixing cups and sticks: These are used to measure and mix the epoxy resin and catalyst.
    • Disposable gloves: To protect your hands during the repair process.
  2. Utility knife or razor blade: Used to remove any loose or damaged material around the repair area.
  3. Masking tape: Used to create a clean boundary around the repair area and prevent epoxy resin from spreading.
  4. Wax paper or plastic wrap: Used to cover the repair area during the curing process to prevent sticking.
  5. Clean cloth or sponge: Used to clean and dry the repair area before applying the epoxy resin.
  6. Optional: Paint or permanent markers: If you want to match the color of your bodyboard, you can use paint or markers to touch up the repaired area.


How do you prepare your bodyboard for repairs?

Before you can start repairing your bodyboard top, it’s important to prepare it for repairs. First, clean your bodyboard using a cloth or sponge. Next, using sandpaper, sand down the area around the damage to remove any dirt and rough edges. After that, use a scraper to smooth out any raised bumps or ridges. Finally, use a hairdryer to thoroughly dry the surface.


How do you apply the resin to the bodyboard?

After your bodyboard is prepped and ready for repairs, it’s time to apply the resin. You should make sure the room is well-ventilated before starting this process, as the resin can be harmful if inhaled. Mix the resin according to the manufacturer’s instructions and apply it to the area in need of repair using the supplied brush. Apply several coats as needed, allowing each coat to dry completely before applying the next.


Can you add any other materials to repair the bodyboard top?

If the damage to your bodyboard top is extensive, you can add other materials to reinforce the repair. These are typically fiberglass or carbon fiber patches. Apply these patches to the surface, making sure they are well secured and fully bonded to the bodyboard using resin. This additional material will not only improve the strength of your bodyboard, but also help to seal the damaged area.


What can you do to prevent the need for further bodyboard top repairs in the future?

Prevention is always better than a cure, and the same applies to repairing bodyboard tops. To avoid having to fix your bodyboard top in the future, it’s important to take good care of it. Rinse your bodyboard with fresh water after every use to remove salt and sand, store your board in a well-ventilated and dry area, and avoid leaving it exposed to direct sunlight.


Should you attempt to repair a bodyboard top on your own?

Repairing a bodyboard top requires some skills, patience, and proper equipment. If you are not confident in your ability to repair it yourself, it’s best to take it to a professional. They have the necessary tools and experience to do the job correctly, which will ensure the longevity of your bodyboard.



In conclusion, fixing a bodyboard top is an easy process that requires some basic skills and materials. By following the steps outlined in this article, you will be able to restore your bodyboard to its former glory, and continue to enjoy the waves. Remember, the key to avoiding future repairs is proper care and maintenance of your bodyboard. If you are not confident in your ability to repair it yourself, take it to a professional to ensure the job is done correctly.

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »