How To Maintain A Bodyboard

Table of Contents

Bodyboarding is an exhilarating water sport that requires proper maintenance of the board. Taking care of your bodyboard ensures that it lasts longer and performs optimally in the water. In this article, we will delve into six sub-questions that will give you a comprehensive guide on how to maintain your bodyboard.


How do I clean my bodyboard?

To clean your bodyboard, you can follow these steps:

  1. Rinse off the board: Take your bodyboard to a location where you can rinse it with fresh water. This can be a hose, a shower, or even a bucket of water. Thoroughly rinse the board to remove any sand, saltwater, or debris.
  2. Use mild soap or detergent: Fill a bucket with warm water and add a small amount of mild soap or detergent. Mix it gently to create a soapy solution.
  3. Scrub the board: Dip a soft sponge or a non-abrasive brush into the soapy water and scrub the entire surface of the bodyboard. Pay close attention to the areas with wax, as they may require a bit more scrubbing. Use gentle, circular motions to remove any dirt or grime.
  4. Rinse again: After scrubbing, rinse the bodyboard thoroughly with fresh water to remove all the soap residue. Make sure to remove any traces of soap from the board as it can affect its performance if left behind.
  5. Dry the bodyboard: Wipe the bodyboard with a clean towel to remove excess water. Then, allow it to air dry completely in a shaded area. Avoid direct sunlight as it can cause damage to the board over time.
  6. Wax the board: Once the bodyboard is dry, you may want to apply a fresh coat of wax to the deck. Waxing helps provide traction and grip while riding the waves. Use a suitable bodyboard wax and apply it according to the manufacturer’s instructions.

By following these steps, you should be able to clean your bodyboard effectively and maintain its performance for a longer time. Remember to regularly clean and care for your bodyboard to ensure its longevity.


How do I store my bodyboard?

Correct storage is critical in maintaining your bodyboard. After cleaning the board, allow it to dry thoroughly before storing it. Store it in a cool, dry place, away from direct sunlight. The heat and UV rays from direct sunlight can cause the board’s material to deteriorate and weaken over time. You can store it in a protective bag or cover it with a towel to prevent it from getting scratched or dented.


How often should I check the leash?

The leash is an essential part of your bodyboarding gear and helps to keep you connected to the board. It’s crucial to check it regularly to ensure that it’s in good condition. Check for signs of wear and tear on the leash, such as fraying, cuts, and cracks. If you notice any damage, replace the leash immediately to prevent it from snapping while in the water, which could be life-threatening.


How do I repair dents and scratches?

Dents and scratches are normal wear and tear on the bodyboard’s surface. However, they can reduce the board’s performance and lifespan. You can repair minor dents and scratches using a bodyboard repair kit, which includes a resin, hardener, and sandpaper. Follow the instructions on the kit, and once the repair is complete, allow the resin to dry thoroughly before using the board.


How do I maintain the slick bottom?

The slick bottom is the underside of the bodyboard that helps to reduce drag and increase speed. It’s crucial to maintain it properly to enhance the board’s performance. After cleaning the board, apply a wax coat to the slick bottom. The wax provides a smooth surface that reduces friction between the board and the water, making it easier to maneuver. You can apply additional wax during each use to ensure that the board remains slick.


How do I maintain the rails?

The rails are the edges of the bodyboard that help to provide stability and control in the water. Proper maintenance of the rails ensures that the board remains in good condition and functions optimally. You can maintain the rails by regularly removing any accumulated sand and debris. Additionally, you can apply a rail saver tape to protect the rails from dents and scratches.



In conclusion, proper maintenance of your bodyboard is crucial in extending its life span and enhancing its performance in the water. Remember to clean it after each use, store it properly, check the leash regularly, repair any dents and scratches, maintain the slick bottom, and take care of the rails. By following these tips, you’ll have a well-maintained bodyboard that’s always ready for your next adventure in the water.

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »