How To Ride An Electric Skateboard

Table of Contents

Riding an electric skateboard looks difficult, but it’s actually quite easy. This beginner’s guide will show you how to ride an electric skateboard.

The first patent for a wireless electric skateboard was filed in 1999. Shortly thereafter, the company began rolling out versions of this fast and fun transporter. How are electric skateboards different from traditional skateboards? Is it difficult to ride? See below.


What Is An Electric Skateboard?

Electric skateboards, also known as esk8s or e-skates, are becoming more and more popular and offer a great deal of driving fun.

The wheels are equipped with motors and removable batteries are embedded in the deck. In addition to electronics, fiberglass and metal parts are also attached to these fast-moving devices.

High-end electric skateboards are equipped with LED headlights and taillights. Decks can range from very rigid to very flexible platforms. They are made of wood, plastic, or both and come with grip tape.

The state-of-the-art electric skateboard model is sleek and sophisticated aerodynamics.

On flat terrain, stiffer boards are preferred. On uneven surfaces, the flexible deck absorbs impact and cushions cracks.


What Are The Differences Between Electric And Regular Skateboards?

At first glance, electric-powered skateboards and ordinary skateboards appear quite a good deal the same. The massive distinction is that the electrical board has one or extra battery-powered motors. You use a far-off manipulation to function the board with the use of diverse buttons and throttle to boost up and brake. Some include an LED show that indicates essential statistics like driving mode, speed, battery ranges, and extra.

Because electric-powered skateboards use motors, they are commonly a good deal quicker than ordinary skateboards. Today, even most of the low-cost alternatives can tour past 20 MPH. It’s additionally simpler to head uphill with a motor-powered board and tour longer distances. The closing major distinction is due to the fact the electric components (especially the battery and motors) weigh the board down, maximum hints are extra challenging. We’ll speak approximately what hints paintings with electric-powered skateboarding.


How To Ride An Electric Skateboard

Now that you know what an electric skateboard is, how do you ride it? Experience riding a regular skateboard is an advantage. Riding an electric skateboard isn’t much different from riding a skateboard propelled by your feet, but the speed and remote control may require a little practice. Learning is more difficult if you are completely new to skateboarding.


Step 1: Wear the correct safety equipment

Before jumping on an electric or regular skateboard, you need to put on the proper gear. This includes matching helmets, wrist guards, elbow pads, and knee pads. Wrist injuries are common in skateboarding. Head injuries can be very serious, so always wear a well-fitting helmet. Place it on top of your head (don’t tilt it back) so the front is about an inch above your eyebrows.

If you use a regular skateboard and don’t carry a lot of gear, we highly recommend changing it. Electric skateboards can go so fast that they can be more dangerous than regular boards. The type of shoes you wear also matters. Closed-toe shoes (not sandals) that cover your feet are best. Padded shoes also help dampen the effects of road vibrations that can be felt on your feet as well.


Step 2: Check your tracks and settings

Skateboard trucks are his two pieces of metal attached to the bottom of the deck. There is one in front and one in the back. If you’re a beginner, I recommend making sure these trucks are nice and strong. This helps you maintain balance and reduce speed fluctuations. As your skill level increases, you can gradually relax to get more flexible and sharp turns.

Also, you should familiarize yourself with the remote control before getting on the skateboard. The board offers different modes. B. “Forward”, “Reverse” and speed settings such as “Slow”, “Medium”, and “Fast”. Start with the slowest mode until you are sure you are comfortable with it. If your board has multiple braking modes (such as the Skatebolt Tornado II), we recommend starting with the lowest and most forgiving setting. Make sure the remote is actually connected to your skateboard.


Step 3: Choose your skateboard stance

If you’ve skated before, chances are you already have a comfortable natural stance. A snowboard stance (if you’re snowboarding) also works. The two main stances are:

normal and stupid. Usually when you step your left foot forward toward the nose of the board. Goofy is about leading with your right foot. Since most people are right-handed, it is common to put the left foot forward. However, that doesn’t mean that your normal stance always feels most natural when you’re right-handed. There is no “right” position, so just assume the most comfortable and stable position.

Once you have a stand, think about how you would feel on your skateboard. are you stiff I don’t want to flop around, but if my body is too rigid, I’m more likely to fall. Extend your arms for balance, but don’t hold them like iron bars. Be prepared to bend your knees slightly as you set off slowly. This bend helps you keep your balance.


Step 4: Start riding

It’s time to ride! We recommend starting your skateboard with a kick-push first, just like riding a regular skateboard. While not required (you can start the motors with the remote control), keeping one foot on the board and pushing off with the other will improve your balance. When ready, gradually start the engine on the slowest setting. Remember to relax your body and bend your knees for better balance and straighten your arms before the first acceleration. If you feel that your posture while driving is strange, change your posture.


Step 5: Learn to turn

How do you turn on your skateboard? It may take some practice if you’re not familiar with it. If so, it’s the same as turning on a normal board. The twist comes in two varieties:

Heel or toe side. In a normal posture, turn the heel side to the left and the toe side to the right. The opposite is true when in a playful stance.

For a heel-side twist, bend your knees slightly, transfer your weight to the heel of your front foot, and push your butt out as you shift your weight. You will feel the board spin. On the toe side, bend your knees and shift your weight slightly forward, resting your weight on the toes of your front foot. If you are about to fall forward, don’t lean back. The board pops out from under you. Bend your knees more and bend forward.

A kick turn is another type of turn that is easy to learn. To pedal, stand on the board, shift your weight to the rear wheel, lift the front wheel, and swing the front of the board in the direction you want to ride. This is a good way to improve your overall balance, but it’s a bit advanced.



Electric skateboards add the thrill and motor power of classic sports. It’s perfect for short commutes and fun rides, as you can go farther and faster than a regular skateboard. If you’re going from a classic skateboard to an electric skateboard, the transition isn’t too difficult.

We hope this beginner’s guide has made it easier for you to learn how to ride an electric skateboard! Always wear safety gear and be aware of your surroundings, regardless of your experience level. An electric skateboard becomes more fun.

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »