What Are Risers On A Skateboard?

Table of Contents

Skateboarding is a popular activity that has been around for decades and continues to grow in popularity. One important aspect of skateboarding is the use of risers on a skateboard. Risers are small pieces of plastic or metal that are placed between the deck of the skateboard and the trucks. They serve a variety of purposes and are essential for any skateboarder looking to optimize their ride. In this essay, we will explore what risers are, how they work, and their importance in the world of skateboarding.

 

What Is The Purpose Of Risers On A Skateboard?

Risers on a skateboard are used to increase the height between the deck and the trucks, which can help with turning and stability. They also act as shock absorbers, reducing the impact on the deck and trucks when riding over rough terrain or doing tricks. In addition, risers can help to prevent wheel bite, which occurs when the wheels make contact with the deck while turning. Overall, risers serve as an important component in the overall performance and functionality of a skateboard.

 

What Are Different Types Of Risers?

There are several types of risers on a skateboard:

  • Hard risers: These are made of a rigid material such as plastic or metal and are used to provide additional support and stability to the skateboard. They are often used when riding on rough terrain or when performing tricks.
  • Soft risers: These are made of a softer material such as rubber or foam and are used to absorb shock and reduce vibration when riding on rough surfaces. They are often used for cruising or commuting.
  • High risers: These are taller risers that provide additional clearance between the deck and the trucks. They are often used for freestyle or downhill skating.
  • Low risers: These are shorter risers that provide less clearance between the deck and the trucks. They are often used for street skating or tricks.
  • Pivot cup risers: These risers are used to adjust the pivot cups on the trucks and allow for greater turning radius and control. They are often used by experienced skaters who want to fine-tune their skateboard performance.

 

How To Install Risers On A Skateboard

  1. Gather the necessary tools and materials. You will need a skateboard, risers, screws, and a Phillips head screwdriver.
  2. Remove the trucks from the skateboard. To do this, you will need to loosen the kingpin nut on each truck using the Phillips head screwdriver. Once the nut is loose, you should be able to lift the truck off the board.
  3. Place the risers on top of the holes where the trucks were mounted. The risers should fit snugly into the holes and should be evenly spaced.
  4. Secure the risers to the skateboard using the screws provided. Use the Phillips head screwdriver to tighten the screws until they are secure.
  5. Reattach the trucks to the skateboard. Place the trucks back onto the skateboard, aligning the holes in the trucks with the holes in the risers. Tighten the kingpin nut using the Phillips head screwdriver to secure the trucks in place.
  6. Test the skateboard to make sure the risers are secure and the trucks are functioning properly. Make any necessary adjustments before using the skateboard.

 

What Is The Effect Of Risers On Skateboard Performance?

Risers are pieces of plastic or rubber that are placed between the skateboard deck and the trucks. They are used to increase the height of the skateboard and provide a more stable ride.

The effect of risers on skateboard performance depends on the type of skating you are doing and the size of the risers you are using.

For street skating, smaller risers (around 1/8” to 1/4”) can help reduce wheel bite (when the wheels rub against the deck) and provide a more stable ride. However, larger risers (around 1/2” or more) can make the skateboard less agile and harder to control.

For park skating, larger risers (around 1/2” or more) can help absorb shock and provide a more stable ride when landing tricks. However, they can also make the skateboard less agile and harder to control.

In general, it is important to find a balance between stability and agility when choosing risers for your skateboard. Experimenting with different sizes and brands can help you find the best combination for your style of skating.

 

Conclusion

In conclusion, risers on a skateboard are essential components that help to raise the deck off the ground and provide additional cushioning to absorb shock and reduce vibration. They are made of plastic or rubber and are placed between the deck and the trucks to increase the clearance and stability of the skateboard. Risers come in various shapes, sizes, and thicknesses, and choosing the right ones can greatly improve the performance and comfort of your skateboard. Whether you are a beginner or an experienced skateboarder, it is important to understand the role of risers and how they can affect your riding experience.

Josh Mitchell

Josh Mitchell

"I live and breath boardriding"

Recent Posts

How To Make A Wakeboard Rails
How To Make Wakeboard Rails

Wakeboarding has emerged as one of the most exhilarating water sports, combining elements of surfing, snowboarding, and skateboarding into a thrilling experience. As wakeboarders push

Read More »
How To Do A Scarecrow Wakeboard
Safety In Wakeboarding

Wakeboarding is an exhilarating watersport that combines elements of water skiing, snowboarding, and surfing. As with any adventure sport, safety should be a top priority

Read More »